PDK Type Vanne d'étranglement avec silencieux d'échappement

Sur mesure selon plan ou échantillon

Distribution uniforme des pores

Emballage d'exportation

Fabriqué à Shanghai par BROLERN avec des outillages interne ajustés. Les classes, matériaux et dimensions figurent dans la spécification ci-dessous — d'autres géométries sont disponibles sur demande.

Tel +86 135 2411 1326 · WhatsApp +86 135 2411 1326

PDK Type Exhaust Muffler Throttle Valve - part of the BROLERN industrial muffler line for pneumatic exhaust and throttling duties.

Threaded connection(BSPP / NPT / BSPT), sintered porous noise-reducing element. Main dimensions are listed below in millimetres; other thread sizes, materials and geometries are available on request.

Key specifications

Product line	Industrial pneumatic mufflers and exhaust muffler throttle valves
Noise-reducing element	Sintered porous insert
Material	Sintered porous insert in the BROLERN media families (bronze, stainless steel, plastic); housing material and finish confirmed against your drawing, thread size and duty
Connection	Threaded(BSPP / NPT / BSPT), M5 to 2 inch (BSL / V / SU / SC / PS / PSE / XY and related series)
Application	Exhaust noise control for pneumatic and hydraulic systems - compressed air discharge, valve and cylinder venting, and instrument air exhaust; also combines exhaust throttling with silencing on the same port
Dimensions	Per-series dimension tables published on each model page
Customization	Custom production from customer drawing or sample; sample quantities for validation

Typical applications

The PDK Type Exhaust Muffler Throttle Valve is used wherever a pneumatic or hydraulic line has to be silenced before it reaches the working area. It is fitted where an exhaust port has to do two jobs at once: throttle the discharge and cut the noise it makes. Typical positions are cylinder exhaust ports, valve dump ports and pressure-relief points on compressor and pump headers, where the noise and the released air would otherwise reach the operator. The published range covers thread sizes 1/8 to 1, with every model dimensioned in millimetres. The published dimension columns are S, so each model can be checked against a drawing before ordering.