ホーム / 製品 / マフラー / PDK Type 排気マフラー調整弁
製品仕様

PDK Type 排気マフラー調整弁

PDK Type 排気マフラー調整弁

PDK Type 排気マフラー調整弁

  • 図面またはサンプル対応
  • 均一な気孔分布
  • 輸出梱包

BROLERNが上海で製造、社内で整合した専用治具を使用。 等級・材料・寸法は下の仕様書に記載 — その他の形状も対応可能です。

Tel +86 135 2411 1326 · WhatsApp +86 135 2411 1326

PDK Type Exhaust Muffler Throttle Valve - part of the BROLERN industrial muffler line for pneumatic exhaust and throttling duties.

Threaded connection(BSPP / NPT / BSPT), sintered porous noise-reducing element. Main dimensions are listed below in millimetres; other thread sizes, materials and geometries are available on request.

Key specifications

Product lineIndustrial pneumatic mufflers and exhaust muffler throttle valves
Noise-reducing elementSintered porous insert
MaterialSintered porous insert in the BROLERN media families (bronze, stainless steel, plastic); housing material and finish confirmed against your drawing, thread size and duty
ConnectionThreaded(BSPP / NPT / BSPT), M5 to 2 inch (BSL / V / SU / SC / PS / PSE / XY and related series)
ApplicationExhaust noise control for pneumatic and hydraulic systems - compressed air discharge, valve and cylinder venting, and instrument air exhaust; also combines exhaust throttling with silencing on the same port
DimensionsPer-series dimension tables published on each model page
CustomizationCustom production from customer drawing or sample; sample quantities for validation

Typical applications

The PDK Type Exhaust Muffler Throttle Valve is used wherever a pneumatic or hydraulic line has to be silenced before it reaches the working area. It is fitted where an exhaust port has to do two jobs at once: throttle the discharge and cut the noise it makes. Typical positions are cylinder exhaust ports, valve dump ports and pressure-relief points on compressor and pump headers, where the noise and the released air would otherwise reach the operator. The published range covers thread sizes 1/8 to 1, with every model dimensioned in millimetres. The published dimension columns are S, so each model can be checked against a drawing before ordering.

Dimensions

PDK Type Exhaust Muffler Throttle Valve

Model

Dimension

L

S

1/8″

35

12

1/4″

36

15

3/8″

44

17

1/2″

50

21

3/4″

60

27

1″

75

34

Photos

BROLERN product photo BROLERN product photo

続けて探す

関連製品

の見積りを依頼:PDK Type 排気マフラー調整弁

Leave your contact and quantity requirements — we reply within 48 hours with a media recommendation and pricing.

ウェブサイト限定
3%オフ

お問い合わせ時にコードをお伝えください

BROLERN WeChat QR WeChatでチャットするにはスキャン
電話+86 135 2411 1326(WhatsApp)
BROFF5P

WeChatをスキャンするかお電話でコードをお知らせください BROFF5P をご注文時に3%割引。このオファーは本ウェブサイト限定です。